Published on August 21st, 2013 | by admin
Everything You Didn’t Know About Plumbing
Humans use their bathrooms a lot. We use the toilet an average of three times a day, shower an average of five times a week, and brush our teeth twice a day, adding up to an average of almost forty trips to the bathroom every week. Though all those visits don’t phase us one way or another, they certainly do have an effect on our plumbing. Our toilets, showers, and sinks all take a beating from our frequent use, often growing corroded and leaky as time wears on. In this article, we’ll take a look at the three major fixtures in the average bathroom, the toilet, the shower, and the sink, and talk about a few ways to make sure they’re properly maintained.
Though the plumbing system of Ancient Rome was well known for its sophistication, the public baths, drainage systems, and aqueducts of the Roman people don’t hold a candle to the level of sophistication we now have just in our toilets. With a variety of flush options available, including some that can save up to 18,000 gallons of water a year, toilets are almost a unique as the people who purchase them. There are four main problems that people tend to encounter with their toilets.
- Constantly running toilet. There are a number of possible solutions to this problem:
- Lift chain is disconnected from the handle lever or is kinked
- Float ball is rubbing on the side of the tank
- Bend float arm to push float ball more into the water
- Water level in the tank needs to be adjusted
- Replace worn or soft tank ball or flapper ball
- Make sure tank ball lift wire is straight and that the tank ball is dropping onto the center of the flush valve opening
- Replace leaky float ball
- Replace faulty ballcock
- Loose toilet handle. You might have to reconnect the lift wire or adjust the handle mounting nut inside the tank.
- Water on the floor. Try tightening a loose water connection or the tank bolts, insulating the inside of the tank, or replacing the wax ring in the toilet base.
- The toilet is clogged. If you aren’t sure how to clear a clogged toilet, it’s easy to learn. Grab a plunger, place it over the hole, and plunge without releasing suction until the toilet flushes.
You might also need to know how to clear a clogged toilet if you drop something in the toilet bowl. An astonishing 85% of Americans who have lost something down the toilet try to retrieve it themselves, but in this case it’s a better idea to call a plumber than to try and figure out how to clear a clogged toilet.
Showers and Faucets
On average, more than 9,000 gallons of water are wasted while the faucet runs as we wait for hot water. Add a leak to the equation, and the amount of wasted water in the average bathroom skyrockets. Though leaky faucet repair might seem like an easy DIY job, it is often much trickier than most homeowners realize. Shower faucet repair is easily botched and is a job better left to a plumber. Get more info here: www.caswellplumbingma.com